Watts Water Hammer Arrestor 1/2 in NPT 150 PSI – The Ultimate Solution for Water Hammer
Introduction
Water hammer is a common problem in plumbing systems that can cause damage to pipes, fittings, and appliances. It occurs when the flow of water is suddenly stopped or changed direction, causing a shock wave that travels through the pipes. This can result in loud banging noises, leaks, and even burst pipes. Fortunately, there is a solution to this problem – the Watts Water Hammer Arrestor 1/2 in NPT 150 PSI.
Features and Benefits
The Watts Water Hammer Arrestor 1/2 in NPT 150 PSI is designed to absorb the shock wave caused by water hammer, preventing damage to your plumbing system. Here are some of its key features and benefits:
- 1/2 inch NPT connection for easy installation
- 150 PSI maximum working pressure
- Durable brass construction for long-lasting performance
- Compact size for easy installation in tight spaces
- Compatible with both residential and commercial plumbing systems
- Meets ASSE 1010 and cUPC standards for quality and safety
Installation
The installation of the Watts Water Hammer Arrestor 1/2 in NPT 150 PSI is quick and easy. Here are the steps:
- Turn off the water supply to the affected area
- Drain the water from the pipes
- Locate the area where the water hammer occurs
- Install the water hammer arrestor in the affected area
- Turn the water supply back on and check for leaks
If you are not comfortable with DIY plumbing, it is recommended to hire a professional plumber to install the water hammer arrestor for you.
Conclusion
The Watts Water Hammer Arrestor 1/2 in NPT 150 PSI is the ultimate solution for water hammer. Its features and benefits make it a reliable and durable choice for both residential and commercial plumbing systems. With easy installation and compatibility with industry standards, it is a must-have for any plumbing system experiencing water hammer. Don’t let water hammer damage your pipes and appliances – install the Watts Water Hammer Arrestor 1/2 in NPT 150 PSI today.
You are looking : watts water hammer arrestor 1/2 in npt 150 psi
9 watts water hammer arrestor 1/2 in npt 150 psi for reference
1.LF150A 1/2 – Watts
- Author: LF150A
- Publish: 11 days ago
- Rating: 4(1767 Rating)
- Highest rating: 5
- Lowest rating: 3
- Descriptions: 1/2 In Lead Free Water Hammer Arrestor, Male NPT Connection. … with one unit for each hot and cold water line up to 150 psi (10.6 bar) working pressure.
- More : 1/2 In Lead Free Water Hammer Arrestor, Male NPT Connection. … with one unit for each hot and cold water line up to 150 psi (10.6 bar) working pressure.
- Source : https://www.watts.com/products/plumbing-flow-control-solutions/plumbing-specialties/water-hammer-arrestors/lf150a/lf150a-12
2.Watts Water Hammer Arrestor 1/2 in NPT 150 psi – Amazon.com
- Author: Watts
- Publish: 7 days ago
- Rating: 1(1827 Rating)
- Highest rating: 5
- Lowest rating: 3
- Descriptions: Watts Water Hammer Arrestor 1/2 in NPT 150 psi ; Was: $107.77$107.77 ; FREE delivery May 8 – 11. Details ; In stock. Usually ships within 2 to 3 days. ; Qty:1.
- More : Watts Water Hammer Arrestor 1/2 in NPT 150 psi ; Was: $107.77$107.77 ; FREE delivery May 8 – 11. Details ; In stock. Usually ships within 2 to 3 days. ; Qty:1.
- Source : https://www.amazon.com/Water-Hammer-Arrestor-NPT-150/dp/B00AM1XLR6
3.Watts 0121227 – 1/2″ LF150A, Water Hammer Arrestor, Lead Free
- Author: Watts
- Publish: 12 days ago
- Rating: 2(1703 Rating)
- Highest rating: 5
- Lowest rating: 3
- Descriptions: Model 150A is a 1/2″ fitting. (adapter only); Maximum Working Pressure: 150psi (10.3 bar); Maximum Shock Pressure: 200psi (13.8 bar); Maximum Velocity: …
- More : Model 150A is a 1/2″ fitting. (adapter only); Maximum Working Pressure: 150psi (10.3 bar); Maximum Shock Pressure: 200psi (13.8 bar); Maximum Velocity: …
- Source : https://www.supplyhouse.com/Watts-0121227-1-2-LF150A-Water-Hammer-Arrestor-Lead-Free
4.Watts Water Hammer Arrestor, 1/2 In NPT, 150 psi LF150A | Zoro
- Author: Watts
- Publish: 20 days ago
- Rating: 1(321 Rating)
- Highest rating: 4
- Lowest rating: 1
- Descriptions: Item: Water Hammer Arrestor ; Pipe Size: 1/2″ ; Connection Type: MNPT ; Body Material: Stainless Steel with Brass Adapter ; Factory Set Pressure: 25 to 35 psi …
- More : Item: Water Hammer Arrestor ; Pipe Size: 1/2″ ; Connection Type: MNPT ; Body Material: Stainless Steel with Brass Adapter ; Factory Set Pressure: 25 to 35 psi …
- Source : https://www.zoro.com/watts-water-hammer-arrestor-12-in-npt-150-psi-lf150a/i/G4542203/
5.Watts Water Hammer Arrestor 1/2 in NPT 150 psi | HomePlumbing
- Author: Watts
- Publish: 5 days ago
- Rating: 3(1665 Rating)
- Highest rating: 4
- Lowest rating: 3
- Descriptions: This 1/2 in. lead free water hammer arrestor provides economical and effective single fixture protection used in residential or domestic water applications …
- More : This 1/2 in. lead free water hammer arrestor provides economical and effective single fixture protection used in residential or domestic water applications …
- Source : https://www.homeplumbing.com/products/watts-water-hammer-arrestor-1-2-in-npt-150-psi
6.Watts Water Hammer Arrestor,1/2 In NPT,150 psi LF150A
- Author: Watts
- Publish: 25 days ago
- Rating: 2(1566 Rating)
- Highest rating: 5
- Lowest rating: 2
- Descriptions: Arrives by Mon, May 1 Buy Watts Water Hammer Arrestor,1/2 In NPT,150 psi LF150A at Walmart.com.
- More : Arrives by Mon, May 1 Buy Watts Water Hammer Arrestor,1/2 In NPT,150 psi LF150A at Walmart.com.
- Source : https://www.walmart.com/ip/Watts-Water-Hammer-Arrestor-1-2-In-NPT-150-psi-LF150A/177516382
7.Watts LF150A | Water Hammer Arrestor 1/2 Inch Npt 150 Psi | 26X567
- Author: Watts
- Publish: 20 days ago
- Rating: 2(469 Rating)
- Highest rating: 3
- Lowest rating: 1
- Descriptions: WATTS LF150A Water Hammer Arrestor, 1/2 Inch NPT, Max 150 psi ; Body Material, Stainless Steel with Brass Adapter ; Connection Type, MNPT ; Diameter, 4 13/32″.
- More : WATTS LF150A Water Hammer Arrestor, 1/2 Inch NPT, Max 150 psi ; Body Material, Stainless Steel with Brass Adapter ; Connection Type, MNPT ; Diameter, 4 13/32″.
- Source : https://www.raptorsupplies.com/pd/watts/lf150a
8.Watts Water Hammer Arrestor 1/2 in NPT 150 psi
- Author: Watts
- Publish: 21 days ago
- Rating: 1(1744 Rating)
- Highest rating: 4
- Lowest rating: 3
- Descriptions: It is designed to control the water pressure shock and prevent water hammer conditions that are damaging to pipes and appliances. It consists of a stainless- …
- More : It is designed to control the water pressure shock and prevent water hammer conditions that are damaging to pipes and appliances. It consists of a stainless- …
- Source : https://everything.plumbing/products/watts-water-hammer-arrestor-1-2-in-npt-150-psi
9.WATTS, MNPT Connection, 1/2 in Pipe Size, Water Hammer Arrestor
- Author: WATTS,
- Publish: 25 days ago
- Rating: 5(306 Rating)
- Highest rating: 5
- Lowest rating: 2
- Descriptions: WATTS Water Hammer Arrestor: MNPT Connection, 1/2 in Pipe Size, 25 to 35 psi Factory Set Pressure. Item: 26X567. Mfr. Model: LF150A …
- More : WATTS Water Hammer Arrestor: MNPT Connection, 1/2 in Pipe Size, 25 to 35 psi Factory Set Pressure. Item: 26X567. Mfr. Model: LF150A …
- Source : https://www.grainger.com/product/WATTS-Water-Hammer-Arrestor-MNPT-26X567